During the demonstration, a sales representative will give you a chance to see the Kirby in action.
Aside from reducing suction power, this also means that less cooling air is passed over the motor.. Miele vacuum cleaners.have a thermal sensor to detect when the motor is starting to overheat.
When this sensor detects overheating, it automatically switches the vacuum off to protect against damage.. To check whether this is the issue,.wait three hours before turning on your Miele vacuum again.It takes around this long for the thermal sensor to reset..
If the vacuum turns back on, then you almost certainly have a blockage problem..Turn off the vacuum immediately until you have found and removed the clog.
The good news is that clearing blockages is usually straightforward.
Here are some of the most important places to check:.Once you’ve removed the previous bag, the only thing left to do is add the new one.
Again, this is a simple process:.Hold the new bag and push the rubber seal onto the internal nozzle inside the drum.
Make sure it’s the right way up.. Make sure the bag is pushed on as far as possible, without forcing it..Remember to replace the pre-motor filter..